Thursday, December 19, 2013
Monday, August 26, 2013
Advantages and disadvantages of a Woodstove?
It's only August, but woodstoves will be on our minds here in the mountains soon enough. What are some of the advantages and disadvantages?
If you live in the woods like we do, there is plenty of wood.
They are good in the wintertime because they sure do warm up the kitchen. In the summer, if you're using it to cook, it can get uncomfortable. You have to build up a fire and wait till it's ready, but by the time you peel potatoes, it's hot. You can't just flip a switch.
You have to gather wood, and that's a disadvantage when you're out of it. But if the electricity goes off or the gas gives out, you're alright if you've got wood. We love these wood stove kettles and wood stove steamers for water to drink and give your home humidity!
A good idea if you're trying to be prepared, as individuals and communities, for unexpected events such as extreme weather. This is a practical solution for power outages and cooking food and water.
If you live in the woods like we do, there is plenty of wood.
They are good in the wintertime because they sure do warm up the kitchen. In the summer, if you're using it to cook, it can get uncomfortable. You have to build up a fire and wait till it's ready, but by the time you peel potatoes, it's hot. You can't just flip a switch.
You have to gather wood, and that's a disadvantage when you're out of it. But if the electricity goes off or the gas gives out, you're alright if you've got wood. We love these wood stove kettles and wood stove steamers for water to drink and give your home humidity!
A good idea if you're trying to be prepared, as individuals and communities, for unexpected events such as extreme weather. This is a practical solution for power outages and cooking food and water.
Thursday, March 7, 2013
End of Burning Season with your Wood Stove
It will soon be spring, which means for many of us it will be the end of the wood burning season. So what are some things you should do before you shut the door of your wood stove until next fall?
Check your stove pipe to be sure it is all in good condition, over the summer is a great time to make any repairs that you need to on your stove pipe and wood stove. Maintenance Stove Pipe
Clean your stove very well and clean the glass on your stove. For information about glass cleaning visit: Wood Stove Glass Cleaning Tip
Check and clean your chimney.
Now is a good time to get your firewood ready for next year so that it has some time to start the seasoning process. How to Season Firewood.
If your wood stove needs to be polished or have a gasket replaced now is a good time to do those things.
What do you do at the end of each burning season to help maintain the safety of your wood stove?
Check your stove pipe to be sure it is all in good condition, over the summer is a great time to make any repairs that you need to on your stove pipe and wood stove. Maintenance Stove Pipe
Clean your stove very well and clean the glass on your stove. For information about glass cleaning visit: Wood Stove Glass Cleaning Tip
Check and clean your chimney.
Now is a good time to get your firewood ready for next year so that it has some time to start the seasoning process. How to Season Firewood.
If your wood stove needs to be polished or have a gasket replaced now is a good time to do those things.
What do you do at the end of each burning season to help maintain the safety of your wood stove?
Wednesday, February 27, 2013
Curing a Wood Stove
If you have a new wood stove it will need to be cured. The paint that is on your new wood stove is the reason for the need to be cured.
So how do you cure a wood stove?
Open your damper door. Take single sheets of newspaper and crumple them into loose balls and fill the bed of your wood stove with them.
Add some small pieces of kindling (do not use leaves or pine needles in this process).
Light your newspaper with a match. Do not use any flammable agents to light it.
Once your newspaper and kindling are burning well add 2 very small pieces of firewood to your wood stove - about 1/4" diameter or less.
Once the firewood is burning well close your stove door and allow the fire to burn out completely.
Let your stove cool down completely and repeat the curing process two or three times.
The amount of smoke produced by this process should be minimal.
So how do you cure a wood stove?
Open your damper door. Take single sheets of newspaper and crumple them into loose balls and fill the bed of your wood stove with them.
Add some small pieces of kindling (do not use leaves or pine needles in this process).
Light your newspaper with a match. Do not use any flammable agents to light it.
Once your newspaper and kindling are burning well add 2 very small pieces of firewood to your wood stove - about 1/4" diameter or less.
Once the firewood is burning well close your stove door and allow the fire to burn out completely.
Let your stove cool down completely and repeat the curing process two or three times.
The amount of smoke produced by this process should be minimal.
Tuesday, February 19, 2013
Operating a More Efficient Wood Stove
We came across a great video on youtube. This video is put out by the Department of Ecology State of Washington. It is about operating a more efficient wood stove. To watch this video visit: http://www.youtube.com/watch?feature=player_embedded&v=pC67gBhWu0Y
This video covers selecting the right fuel for your wood stove, starting your fire correctly, maintaining your fire, etc.
As with all information that you find, always be sure to cross reference it with the information that came with the wood stove you own. Always follow your wood stove's manufacturer instructions first as each wood stove is made a little differently.
This video covers selecting the right fuel for your wood stove, starting your fire correctly, maintaining your fire, etc.
As with all information that you find, always be sure to cross reference it with the information that came with the wood stove you own. Always follow your wood stove's manufacturer instructions first as each wood stove is made a little differently.
Monday, February 11, 2013
2013's Most Popular Wood Stove Blogs
We've already starting into the 2nd month of 2013, time sure is flying this year. We've decided to take a peek and see which three blogs our readers seem to be enjoying the most so far this year:
Did your favorite blog make it? If not which one of our blogs did you find the most informative?
Did your favorite blog make it? If not which one of our blogs did you find the most informative?
Friday, February 1, 2013
Three Wood Stove Myths
We've rounded up a few myths about using wood stoves to help clear the air for those of you who read our blog.
Myth: Different types of wood burned in your stove give off different types of heat.
It doesn't matter if your wood is hard wood or soft wood, the type will not determine whether your wood will give off more or less heat. All wood has the same energy to mass ratio. The difference that you will come across in hard vs. soft woods is how long it takes to burn and the total heat energy that is supplied for creating useful heat vs. heat being wasted during combustion. Hard woods burn slower while your soft woods will burn longer. Your total heat energy will be the same, it is just the time it takes to use up all of the wood's energy is varied. The type of wood will only affect how often you need to put wood into your wood stove. Keep in mind that regardless of your wood type your wood should be seasoned, read more at How to Season Firewood
Myth: It is beneficial to starve a stove for adequate air combustion.
A starved fire will become overly smoky. This is caused by incomplete combustion which will cause more unburned particulates and gaseous air pollutants to be created than a hot fire that has adequate air supply will make. Poor combustion can also cause more build up of creosote in your chimney which is a fire hazard. Carbon monoxide build up is also a concern with incomplete combustion.
Myth: A wood burning stove is not any more efficient than an open fireplace.
If you have a quality wood burning stove it should operate between 70-85% efficiency when the door is closed. This means that just 15-30% of your heat is lost. When you have an open fire in a fireplace the efficiency is about 20% which means more than 4/5 of your heat is being lost through your chimney.
Myth: Different types of wood burned in your stove give off different types of heat.
It doesn't matter if your wood is hard wood or soft wood, the type will not determine whether your wood will give off more or less heat. All wood has the same energy to mass ratio. The difference that you will come across in hard vs. soft woods is how long it takes to burn and the total heat energy that is supplied for creating useful heat vs. heat being wasted during combustion. Hard woods burn slower while your soft woods will burn longer. Your total heat energy will be the same, it is just the time it takes to use up all of the wood's energy is varied. The type of wood will only affect how often you need to put wood into your wood stove. Keep in mind that regardless of your wood type your wood should be seasoned, read more at How to Season Firewood
Myth: It is beneficial to starve a stove for adequate air combustion.
A starved fire will become overly smoky. This is caused by incomplete combustion which will cause more unburned particulates and gaseous air pollutants to be created than a hot fire that has adequate air supply will make. Poor combustion can also cause more build up of creosote in your chimney which is a fire hazard. Carbon monoxide build up is also a concern with incomplete combustion.
Myth: A wood burning stove is not any more efficient than an open fireplace.
If you have a quality wood burning stove it should operate between 70-85% efficiency when the door is closed. This means that just 15-30% of your heat is lost. When you have an open fire in a fireplace the efficiency is about 20% which means more than 4/5 of your heat is being lost through your chimney.
Thursday, January 24, 2013
How to Clean your Fireplace
Cleaning out a fireplace can seem like a daunting task, but it doesn't have to be.
What you need to get started cleaning:
Dish Washing Liquid
Fireplace Tool Set
Glass Cleaner
Paper Towels
Plastic Tarp
Rubber Gloves
Scrub Brush
Soft Cloth
Spray Bottle full of water
Trash can with a lid
Used Coffee Grounds
An apron or smock to keep your clothes clean
Something soft to kneel on to save your knees, optional but recommended.
How to Clean your Fireplace:
Be sure to allow your fireplace to cool for at least 24 hours after your last fire before you attempt to clean it.
Place your tarp in front of your fireplace, this will help you to catch ashes and keep the area around the fireplace clean.
Lay out your tarp in front of the fireplace to catch ashes, etc.
Remove your fireplace screen, leftover firewood, tinder, and the fireplace grate. Set these on your tarp.
Throw out any badly burnt firewood, if there is firewood that is still burnable you can keep it.
Used coffee grounds should be sprinkled over the ashes to keep them from blowing around and creating a larger mess.
Using your brush from your fireplace tool set, sweep out your fireplace starting at the top of each interior wall and work your way down and out.
Shovel the ashes into a pan and dump them into the trash or into your compost pile if you have one.
Sweep off your fireplace screen to remove any dirt and debris on it.
On the brick of your fireplace's exterior you will need to spray water onto any sooty areas. If your fireplace is less than 50 years old you can use a hearth cleaner, if it is older than that you will want to use only water. Scrub with your scrub brush, spray with more water than use your soft cloth to dry it. If your fireplace has an iron exterior you will spray it with hearth cleaner, rinse with water, and dry off with your paper towels. For marble, spray with water and wipe down with your dish washing liquid and soft cloth. Spray to rinse and dry with paper towels.
For fireplaces with glass doors, clean them with hearth cleaner, front and back, be sure to remove the cleaner before it dries. (You can also try the method we talked about previously in Wood Stove Glass Cleaning Tip we haven't tried this method ourselves yet, so use your own best judgement.)
Lay your fireplace tools on the tarp, spray with hearth cleaner and wipe clean with your paper towels.
Place your grate and still good firewood back into your fireplace.
Once you dispose of all the debris on your tarp you are officially finished with cleaning your fireplace.
What you need to get started cleaning:
Dish Washing Liquid
Fireplace Tool Set
Glass Cleaner
Paper Towels
Plastic Tarp
Rubber Gloves
Scrub Brush
Soft Cloth
Spray Bottle full of water
Trash can with a lid
Used Coffee Grounds
An apron or smock to keep your clothes clean
Something soft to kneel on to save your knees, optional but recommended.
How to Clean your Fireplace:
Be sure to allow your fireplace to cool for at least 24 hours after your last fire before you attempt to clean it.
Place your tarp in front of your fireplace, this will help you to catch ashes and keep the area around the fireplace clean.
Lay out your tarp in front of the fireplace to catch ashes, etc.
Remove your fireplace screen, leftover firewood, tinder, and the fireplace grate. Set these on your tarp.
Throw out any badly burnt firewood, if there is firewood that is still burnable you can keep it.
Used coffee grounds should be sprinkled over the ashes to keep them from blowing around and creating a larger mess.
Using your brush from your fireplace tool set, sweep out your fireplace starting at the top of each interior wall and work your way down and out.
Shovel the ashes into a pan and dump them into the trash or into your compost pile if you have one.
Sweep off your fireplace screen to remove any dirt and debris on it.
On the brick of your fireplace's exterior you will need to spray water onto any sooty areas. If your fireplace is less than 50 years old you can use a hearth cleaner, if it is older than that you will want to use only water. Scrub with your scrub brush, spray with more water than use your soft cloth to dry it. If your fireplace has an iron exterior you will spray it with hearth cleaner, rinse with water, and dry off with your paper towels. For marble, spray with water and wipe down with your dish washing liquid and soft cloth. Spray to rinse and dry with paper towels.
For fireplaces with glass doors, clean them with hearth cleaner, front and back, be sure to remove the cleaner before it dries. (You can also try the method we talked about previously in Wood Stove Glass Cleaning Tip we haven't tried this method ourselves yet, so use your own best judgement.)
Lay your fireplace tools on the tarp, spray with hearth cleaner and wipe clean with your paper towels.
Place your grate and still good firewood back into your fireplace.
Once you dispose of all the debris on your tarp you are officially finished with cleaning your fireplace.
Wednesday, January 16, 2013
Benefits of Pellet Stoves
We have discussed the benefits of wood stoves in the past. We thought it was time to look at the benefits of pellet stoves:
There area few disadvantages to the pellet stove, one of those being that they use electricity to run, so they are not the best investment for a heating back up for power outages. However, some pellet stoves do come with a battery back up. But if the power is out for an extended period of time, there is the risk of the battery running down.
What do you consider an advantage to the pellet stove?
- Easy to operate.
- Easy to fuel.
- Doesn't produce smoke.
- Higher combustion and heating efficiency than traditional wood stoves.
- Lower fuel cost.
- Wood pellets are made from recycled components making them more environmentally sound.
- Most are easier to clean than traditional wood stoves.
There area few disadvantages to the pellet stove, one of those being that they use electricity to run, so they are not the best investment for a heating back up for power outages. However, some pellet stoves do come with a battery back up. But if the power is out for an extended period of time, there is the risk of the battery running down.
What do you consider an advantage to the pellet stove?
Thursday, January 10, 2013
Basic Pellet Stove Tips
For those of you that are new to pellet stoves here are a few tips to help get you started:
Our first tip is a simple tip, but it is important. Be sure to read the owners/instruction manual that came with your pellet stove. As with any type of appliance instructions can vary between brands and models. If you have misplaced or cannot find your owner's manual then you will want to try contacting the company that manufactures the stove you own to see if they can mail you a copy or email a .pdf version of it.
The correct type of pellets can make a big difference in how efficient your pellet stove is. Pellet stoves do NOT use firewood like you would use in a wood stove. Instead, a pellet stove uses compressed pellets. These pellets are designed specifically to use in your pellet stove. Most of the pellets are wood compressed pellets, but there are other options for pellets such as waste paper pellets and grass pellets.
Before you use your pellet stove for the first time you will need to check that your stove pipes and venting meet your local building requirements. You want to do this to be sure that your set-up is safe to use. When you install your stove refer to your manufacturer's instructions. Make sure all your stove pipe seams are sealed properly. High temperature caulk or stove cement can be used to seal these seams. Be sure to use a type of stove cement that is recommended for stove pipe.
To start up your stove you will need to read your instructions as each pellet stove manufacturer configures their pellet stoves differently for the start up process. If you fail to follow your manufacturer's start-up instructions problems can be created with the pellet stove's operation. To shut off your stove you will need to use the controls to set the shut off for your unit. Do not unplug the stove to shut it down, the stove needs to cool down before it completely shuts itself off.
Our first tip is a simple tip, but it is important. Be sure to read the owners/instruction manual that came with your pellet stove. As with any type of appliance instructions can vary between brands and models. If you have misplaced or cannot find your owner's manual then you will want to try contacting the company that manufactures the stove you own to see if they can mail you a copy or email a .pdf version of it.
The correct type of pellets can make a big difference in how efficient your pellet stove is. Pellet stoves do NOT use firewood like you would use in a wood stove. Instead, a pellet stove uses compressed pellets. These pellets are designed specifically to use in your pellet stove. Most of the pellets are wood compressed pellets, but there are other options for pellets such as waste paper pellets and grass pellets.
Before you use your pellet stove for the first time you will need to check that your stove pipes and venting meet your local building requirements. You want to do this to be sure that your set-up is safe to use. When you install your stove refer to your manufacturer's instructions. Make sure all your stove pipe seams are sealed properly. High temperature caulk or stove cement can be used to seal these seams. Be sure to use a type of stove cement that is recommended for stove pipe.
To start up your stove you will need to read your instructions as each pellet stove manufacturer configures their pellet stoves differently for the start up process. If you fail to follow your manufacturer's start-up instructions problems can be created with the pellet stove's operation. To shut off your stove you will need to use the controls to set the shut off for your unit. Do not unplug the stove to shut it down, the stove needs to cool down before it completely shuts itself off.
Tuesday, January 8, 2013
Tips for Keeping Indoor Wood Stacks Clean
When toting wood into your home to keep on hand for those days when the weather is below freezing and you don't want to be outdoors anymore than you have to can cause quite a mess. Even the wood stack itself seems to be dirty some days. Sometimes it seems like wood chips can be found in nearly every nook and corner of your home. So how can we keep those wood stacks contained and as neat as possible?
One tip to help keep wood chips and dirt off of the floor and from being tracked around your home is to have a large boot tray setting underneath your firewood rack. This tray will catch everything that falls off of the wood, keeping it contained until you are ready to clean it up. Some people keep these wood chips to use as a fire starter helper.
Also be sure to check any wood for signs of bug infestation. These should either be put directly into the fire or not stored in your home. If you leave these pieces of wood in your firewood rack then you are inviting the bugs to warm up and spend the winter in your home.
What are your tips for keeping your indoor wood stack neat and tidy?
One tip to help keep wood chips and dirt off of the floor and from being tracked around your home is to have a large boot tray setting underneath your firewood rack. This tray will catch everything that falls off of the wood, keeping it contained until you are ready to clean it up. Some people keep these wood chips to use as a fire starter helper.
Also be sure to check any wood for signs of bug infestation. These should either be put directly into the fire or not stored in your home. If you leave these pieces of wood in your firewood rack then you are inviting the bugs to warm up and spend the winter in your home.
What are your tips for keeping your indoor wood stack neat and tidy?
Thursday, January 3, 2013
Wood Stove Outlet Most Popular Posts 2012
While we welcome in a New Year in our offices we also celebrate the 2nd year anniversary of our blog. Our first post was on January 3rd of 2011. So in celebration of the New Year we would like to share with you our top 5 most read posts of 2012.
Hope you have a great 2013.
How to Check Your Chimney- Wood Stove Glass Cleaning Tip
- Wood Stove Chimney Connection
- Fireplace Cleaning
- Chimney & Fireplace Tips
Hope you have a great 2013.
Friday, December 28, 2012
Why you need a Wood Stove Thermometer
If you own and use a wood or coal stove, then you should have a wood stove thermometer. The stove thermometer will tell you if your wood stove is operating efficiently at just a glance.
The Rutland stove thermometer is designed so that you can easily see if your stove is burning at a temperature that can cause creosote build up.
Installation instructions for the Rutland Stove thermometer are as follows:
Install thermometer on the vertical single wall pipe of your coal or wood stove.
The recommended placement of the thermometer is not more than 6" above the surface of the stove. However, the thermometer may also be placed on the top surface of the stove.
A safety wire is provided to prevent the unit from dropping if it becomes overheated.
The most efficient burn zone may vary, depending on specific stove or area of stove or pipe surface being measured.
Be sure to consult your stove owner manual for proper burn temperatures as each stove can be different.
The Rutland stove thermometer is designed so that you can easily see if your stove is burning at a temperature that can cause creosote build up.
Installation instructions for the Rutland Stove thermometer are as follows:
Install thermometer on the vertical single wall pipe of your coal or wood stove.
The recommended placement of the thermometer is not more than 6" above the surface of the stove. However, the thermometer may also be placed on the top surface of the stove.
A safety wire is provided to prevent the unit from dropping if it becomes overheated.
The most efficient burn zone may vary, depending on specific stove or area of stove or pipe surface being measured.
Be sure to consult your stove owner manual for proper burn temperatures as each stove can be different.
Tuesday, December 18, 2012
DIY Pine cone Firestarters
Pine cones make great firestarters, if you aren't up to making your own you can purchase firestarters at http://www.woodstove-outlet.com/fireplace/startmatch.htm.
Items you'll need:
Pine Cones
Fine Candle Wick
Paraffin, Candlewax, or beeswax
Newspaper or wax paper
Cheap pot that you won't use for food after this project, deep straight sided pot is the best.
The first thing you need to do is gather your pine cones. If the pine cones are too dry then they will be brittle and tend to break as you handle them. Pine cones that are too wet need to be allowed to dry for seven to ten days in a weather protected area.
Next wrap the wick around the pinecone tightly being sure to leave a "tail" at the tip of the pinecone so that you can use this as a handle for when you are dipping the cone.
Melt down your paraffin or wax in the pot. While it is melting set up your dipping and drying area. Line your drying area with newspaper or wax paper. This is the area that the pine cones are going to rest on while they are drying. If you want them to come up easier, we recommend going with the wax paper, the pine cones will stick to the newspaper some.
Be sure to keep your eye on your wax during the set up so that it doesn't burn. Your wax needs to be liquid, but not so fluid enough that it just drips right off of your pine cone. If it is that fluid you will want to let it cool a bit before you start dipping your pine cones in it.
After you've dipped your pine cone let it drip over the pot for a bit before putting it in the drying area, this just helps to keep from making a huge mess by having wax drip everywhere. You may need to dip some of your pine cones again after they've dried for a bit. The wax needs to lightly cover the pine cone all over:
While waiting for being used as firestarters these pinecones make a lovely decoration when displayed in a small basket.
There are other methods to creating pine cone fire starters. Some use cupcake tins for an interesting take on this project. A quick search will give you tons of various tutorials.
Items you'll need:
Pine Cones
Fine Candle Wick
Paraffin, Candlewax, or beeswax
Newspaper or wax paper
Cheap pot that you won't use for food after this project, deep straight sided pot is the best.
The first thing you need to do is gather your pine cones. If the pine cones are too dry then they will be brittle and tend to break as you handle them. Pine cones that are too wet need to be allowed to dry for seven to ten days in a weather protected area.
Next wrap the wick around the pinecone tightly being sure to leave a "tail" at the tip of the pinecone so that you can use this as a handle for when you are dipping the cone.
Melt down your paraffin or wax in the pot. While it is melting set up your dipping and drying area. Line your drying area with newspaper or wax paper. This is the area that the pine cones are going to rest on while they are drying. If you want them to come up easier, we recommend going with the wax paper, the pine cones will stick to the newspaper some.
Be sure to keep your eye on your wax during the set up so that it doesn't burn. Your wax needs to be liquid, but not so fluid enough that it just drips right off of your pine cone. If it is that fluid you will want to let it cool a bit before you start dipping your pine cones in it.
After you've dipped your pine cone let it drip over the pot for a bit before putting it in the drying area, this just helps to keep from making a huge mess by having wax drip everywhere. You may need to dip some of your pine cones again after they've dried for a bit. The wax needs to lightly cover the pine cone all over:
While waiting for being used as firestarters these pinecones make a lovely decoration when displayed in a small basket.
There are other methods to creating pine cone fire starters. Some use cupcake tins for an interesting take on this project. A quick search will give you tons of various tutorials.
Monday, December 10, 2012
Some Chimney and Fireplace Keyterms
Sometimes knowing the lingo to your chimney and fireplace can help when you are shopping for items, cleaning, or explaining things regarding your chimney and/or fireplace.
Air-to-Fuel Ratio: The ratio of air to fuel in an appliance that burns solid fuel. If you are burning 1 pound of wood you typically need 35 pounds of air.
Andirons: Two pieces of metal that are usually decorative in nature that support your firewood in the firebox.
Ash Pit: Typically located in the chimney base, it is a storage compartment for ashes. There is usually an Ash Pit Door that allows access to clean it out, the ash pit door is also called the Clean Out Door. Most wood stoves also feature an Ash Drawer, it serves the same purpose as the Ash Pit.
Back Puffing: this occurs when there is a negative pressure draft created in a venting system.
Blower: a fan that forces air that is under pressure.
BTU: British Thermal Unit. One BTU is the amount of heat energy that is needed to raise the temperature of one pound of water by one degree Fahrenheit. It is approximately the amount of heat produced by one lighted kitchen match.
Burn Rate: number of pounds of fuel that is consumed in one hour of combustion.
Chimney: One or more vertical passageways for conveying flue gases outside of the home.
Chimney Cap Or Flue Cap: a factory-fabricated appliance that is installed on the top of the chimney in order to protect it from water intrusion, birds, leaves, and other debris.
Clearance: the minimum distance that is required between a wood stove or fireplace and any combustible materials. This is defined in your local fire and building codes.
Combustion: rapid oxidation of fuel that gives off heat and light. Also known as burning.
Creosote: deposits in the chimney and/or flue that originate as condensed wood smoke having three stages. 1st stage is soot, 2nd stage is lumpy and crisp, 3rd stage looks like roofing tar and is smooth as glass.
Damper: A moveable blade located in the throat of the fireplace. Designed to disrupt the air flow into the chimney.
Double Wall: chimney constructed of an inner liner and outer shell, reducing conduction of heat to the outside. This allows the chimney to be installed without the danger of combustion to support materials.
Draft: pressure difference caused by rising gas, which draws combustion air into the appliance and expels the exhaust gas outside through the chimney.
Efficiency: expressed as the percentage of heat that goes toward actually warming the room as opposed to being vented outdoors.
Firebox: The area that contains the grate or andirons upon which the fuel is arranged for burning.
Firebrick - heat refractory brick used in the construction of a firebox.
Fireplace - includes the hearth, firebox, fascia, and chimney.
Flashing - sheet metal used to make a water-tight seal between the chimney and the roof.
Flue: passage in the chimney that moves the products of combustion up and out of the chimney.
Flue Collar: main point of connection between the chimney and the vent.
Flue Liners: materials that add protection to the inside of the chimney, protecting it from intense heat.
Grate: a raised grid-like metal (most used metal being cast iron) structure where fuel is placed in the firebox.
Hearth: area that surrounds the stove or fireplace, mostly created from non-combustible brick or tile.
Vent: continuous passage from the flue collar to the draft hood. Flue gas temperatures at the outlet do not exceed 600 degrees.
Air-to-Fuel Ratio: The ratio of air to fuel in an appliance that burns solid fuel. If you are burning 1 pound of wood you typically need 35 pounds of air.
Andirons: Two pieces of metal that are usually decorative in nature that support your firewood in the firebox.
Ash Pit: Typically located in the chimney base, it is a storage compartment for ashes. There is usually an Ash Pit Door that allows access to clean it out, the ash pit door is also called the Clean Out Door. Most wood stoves also feature an Ash Drawer, it serves the same purpose as the Ash Pit.
Back Puffing: this occurs when there is a negative pressure draft created in a venting system.
Blower: a fan that forces air that is under pressure.
BTU: British Thermal Unit. One BTU is the amount of heat energy that is needed to raise the temperature of one pound of water by one degree Fahrenheit. It is approximately the amount of heat produced by one lighted kitchen match.
Burn Rate: number of pounds of fuel that is consumed in one hour of combustion.
Chimney: One or more vertical passageways for conveying flue gases outside of the home.
Chimney Cap Or Flue Cap: a factory-fabricated appliance that is installed on the top of the chimney in order to protect it from water intrusion, birds, leaves, and other debris.
Clearance: the minimum distance that is required between a wood stove or fireplace and any combustible materials. This is defined in your local fire and building codes.
Combustion: rapid oxidation of fuel that gives off heat and light. Also known as burning.
Creosote: deposits in the chimney and/or flue that originate as condensed wood smoke having three stages. 1st stage is soot, 2nd stage is lumpy and crisp, 3rd stage looks like roofing tar and is smooth as glass.
Damper: A moveable blade located in the throat of the fireplace. Designed to disrupt the air flow into the chimney.
Double Wall: chimney constructed of an inner liner and outer shell, reducing conduction of heat to the outside. This allows the chimney to be installed without the danger of combustion to support materials.
Draft: pressure difference caused by rising gas, which draws combustion air into the appliance and expels the exhaust gas outside through the chimney.
Efficiency: expressed as the percentage of heat that goes toward actually warming the room as opposed to being vented outdoors.
Firebox: The area that contains the grate or andirons upon which the fuel is arranged for burning.
Firebrick - heat refractory brick used in the construction of a firebox.
Fireplace - includes the hearth, firebox, fascia, and chimney.
Flashing - sheet metal used to make a water-tight seal between the chimney and the roof.
Flue: passage in the chimney that moves the products of combustion up and out of the chimney.
Flue Collar: main point of connection between the chimney and the vent.
Flue Liners: materials that add protection to the inside of the chimney, protecting it from intense heat.
Grate: a raised grid-like metal (most used metal being cast iron) structure where fuel is placed in the firebox.
Hearth: area that surrounds the stove or fireplace, mostly created from non-combustible brick or tile.
Seasoned Wood: wood that has been allowed to dry from 6 to 12 months. This type of wood burns more easily and emits fewer particulates than freshly cut wood, which results in less creosote build up.
Vent: continuous passage from the flue collar to the draft hood. Flue gas temperatures at the outlet do not exceed 600 degrees.
Friday, November 30, 2012
What are Fireplace Andirons
If you've been looking at accessories for your fireplace you have probably come across fireplace andirons. Most andirons are made in a way that they look very nice and decorative, but they are more than just a pretty addition to your fireplace.
Andirons are for holding logs in the fireplace so that they do not roll out into the floor; they also keep the logs lifted so that air can get around the logs and help to feed the fire in your fireplace.
Most people have replaced the andiron with a fireplace grate. When holding smaller pieces of wood the grate is preferred as it has more surface area for the wood to rest upon. But some people prefer andirons, since they allow the fire to be closer to the bottom of the fireplace, in a smaller fireplace this is sometimes necessary.
Andirons are considered by most to be prettier in a fireplace than a grate. Andirons began to be made in a more decorative manner during the Italian Renaissance.
Andirons are for holding logs in the fireplace so that they do not roll out into the floor; they also keep the logs lifted so that air can get around the logs and help to feed the fire in your fireplace.
Most people have replaced the andiron with a fireplace grate. When holding smaller pieces of wood the grate is preferred as it has more surface area for the wood to rest upon. But some people prefer andirons, since they allow the fire to be closer to the bottom of the fireplace, in a smaller fireplace this is sometimes necessary.
Andirons are considered by most to be prettier in a fireplace than a grate. Andirons began to be made in a more decorative manner during the Italian Renaissance.
Thursday, November 22, 2012
Wood Stove Smoking into Room
Are you noticing smoke inside your home when the stove is burning or when you've opened the door to load additional wood.
Here are the things you need to check:
Edit we have had a tip added in a comment on this pin on Pinterest:
Quote from Aaron J. on Pinterest: "Great advice, one other thing that might cause back smoke is an incorrectly sized chimney liner or a cracked liner."
Thanks for the tip Aaron!
Here are the things you need to check:
- Chimney Cap: these can become clogged, most chimney caps have spark screens and cold, wet, damp weather can cause the screen to attract more embers than it should and it will then clog up.
-Issues that can add to the clogging of the chimney cap include: wet wood, small fires, and damping down the stove too early. But this is an easy solution. Clean your chimney cap and the smoke should go out. - Draft: if the issue is not with the chimney cap, then you may not have a good draft. This could be due to the flue being cold. Some recommend to "pre-heat" the flue prior to lighting the fire.
- Dirty Chimney: This can cause decreased room for the smoke to exhaust. Keeping your wood stove and chimney clean and properly maintenance will help to prevent this. You should clean your wood stove and chimney a minimum of once a year, but it is recommended to have your chimney cleaned for every 2 cords of wood that are burned through your wood stove.
Edit we have had a tip added in a comment on this pin on Pinterest:
Quote from Aaron J. on Pinterest: "Great advice, one other thing that might cause back smoke is an incorrectly sized chimney liner or a cracked liner."
Thanks for the tip Aaron!
Wednesday, November 14, 2012
Fireplace Cleaning
It is the time of the year to be using your fireplace, before you start using it you will want to be sure that your fireplace is clean. Ideally, you should clean your fireplace in the summer when you won't be using it for some time, but if it has not been cleaned, then there is a risk of having creosote or soot cause a fire.
Now you will want to be sure that all the ash has cooled before you go about cleaning your fireplace.
To remove the ashes you can use fireplace tools such as shovels, brooms, ash rakes, etc.
Once the ashes have been removed you will need to take out grates, andirons, fire-backs, etc. I recommend taking these to the yard to clean with a wire brush, then you can use a specialized polish on them to restore them to look practically new. Now is also a good time to clean your fireplace accessories.
You will want to use a wire brush to remove any build up of creosote and tare on the damper and lower part of the chimney. Shovel or vacuum this debris out of the fire box.
To clean the firebox you can use solvents created for cleaning fireplaces, you can also use washing soda, vinegar, or TSP with warm water. Use a stiff bristled brush on the inside of the firebox once your cleaning solvent of choice has had time to soak.
If using hot water & vinegar or hot water & washing soda you will want to scrub the liquid into the firebox and let it soak for about 20 minutes or so. Come back and scrub your firebox and fireplace with a generous application of this cleaning liquid.
Once your fireplace is clean you will want to rinse it off with warm water. Let your firebox air out and dry. Close your damper to prevent the fireplace from sucking air out of your home. But be sure to open it before starting a fire.
You will probably want to go ahead and clean your chimney at this time, also suggested reading: Chimney & Fireplace Tips
Now you will want to be sure that all the ash has cooled before you go about cleaning your fireplace.
To remove the ashes you can use fireplace tools such as shovels, brooms, ash rakes, etc.
Once the ashes have been removed you will need to take out grates, andirons, fire-backs, etc. I recommend taking these to the yard to clean with a wire brush, then you can use a specialized polish on them to restore them to look practically new. Now is also a good time to clean your fireplace accessories.
You will want to use a wire brush to remove any build up of creosote and tare on the damper and lower part of the chimney. Shovel or vacuum this debris out of the fire box.
To clean the firebox you can use solvents created for cleaning fireplaces, you can also use washing soda, vinegar, or TSP with warm water. Use a stiff bristled brush on the inside of the firebox once your cleaning solvent of choice has had time to soak.
If using hot water & vinegar or hot water & washing soda you will want to scrub the liquid into the firebox and let it soak for about 20 minutes or so. Come back and scrub your firebox and fireplace with a generous application of this cleaning liquid.
Once your fireplace is clean you will want to rinse it off with warm water. Let your firebox air out and dry. Close your damper to prevent the fireplace from sucking air out of your home. But be sure to open it before starting a fire.
You will probably want to go ahead and clean your chimney at this time, also suggested reading: Chimney & Fireplace Tips
Tuesday, November 6, 2012
History of the Fireplace
Fireplaces have been around since the invention of fire. They were originally found in caves, but with no chimneys or ventilation. Evidence of man-made prehistoric fires exist on all five continents.
Fireplace grates came into play around 1678 when Prince Rupert raised the grate of the fireplace which improved the airflow and venting system.
The fireplace as we think of it today really came about during the Victorian Era. The main design of the fireplace really hasn't changed that much since those times, they consist of two main elements: the surround and the insert.
There are many accessories for fireplaces today; grates, fire screens which originated as a form of furniture that was a shield between people and the fireplace. Fire screens help protect the room from open flames and flying embers. Andirons hold up the fire wood so that air can more easily pass around it, the Italian Renaissance saw the andiron go from plain to more decorative works of art. The fireback was first seen in the 1500s, these tools help to hold the heat and project it back into the room instead of allowing it to be lost up the chimney. Fire irons or fire pokers have been used with fires since the paleolithic period, these allow you to stir up the fire. Bellows help to get a fire started by give blasts of air to feed the fire. These are just a sampling of the tools and accessories that can be used with a fireplace.
Sources:
http://en.wikipedia.org/wiki/Fireplace#History
http://www.fireplaces-fireplaces.com/guides_Fireplace-History.htm
Fireplace grates came into play around 1678 when Prince Rupert raised the grate of the fireplace which improved the airflow and venting system.
The fireplace as we think of it today really came about during the Victorian Era. The main design of the fireplace really hasn't changed that much since those times, they consist of two main elements: the surround and the insert.
There are many accessories for fireplaces today; grates, fire screens which originated as a form of furniture that was a shield between people and the fireplace. Fire screens help protect the room from open flames and flying embers. Andirons hold up the fire wood so that air can more easily pass around it, the Italian Renaissance saw the andiron go from plain to more decorative works of art. The fireback was first seen in the 1500s, these tools help to hold the heat and project it back into the room instead of allowing it to be lost up the chimney. Fire irons or fire pokers have been used with fires since the paleolithic period, these allow you to stir up the fire. Bellows help to get a fire started by give blasts of air to feed the fire. These are just a sampling of the tools and accessories that can be used with a fireplace.
Sources:
http://en.wikipedia.org/wiki/Fireplace#History
http://www.fireplaces-fireplaces.com/guides_Fireplace-History.htm
Thursday, November 1, 2012
Kerosene Heater Safety Tips
When using heating such as kerosene heaters, it is always a good idea to follow safety tips to ensure that you and your family stay as safe as possible. We've gathered some information for you on using kerosene heaters more safely.
It has been found that the majority of heating related fires are caused by kerosene heaters. In these cases it was found that more often the fire was caused by misuse or abuse of the kerosene heater rather than a problem with the heater itself. The first thing you should do with any type of back up heating options, such as kerosene heaters is to read and follow the manufacturer's instructions.
To choose a kerosene heater you should keep these things in mind:
Be sure the heater that you purchase has a UL (underwriters laboratory) listing.
Choose a heater that has an automatic safety switch that switches the heater off automatically if there is an event in which the heater gets tipped over.
Some special features that are handy: An automatic starter that will eliminate the need for matches, a fuel gauge to help ensure you do not overfill the heater as overfilling can be dangerous, a safety grill to help prevent contact burns.
Be sure that you have a smoke alarms and a carbon monoxide detector in your home.
Always take care of your wick and know how to change your kerosene heater wick.
When refueling your heater, you need to wait until your heater has cooled and refill it outside. If you refill a heater when it is hot or still burning it can start a fire. Use only crystal-clear k1 kerosene in your kerosene heater.
It has been found that the majority of heating related fires are caused by kerosene heaters. In these cases it was found that more often the fire was caused by misuse or abuse of the kerosene heater rather than a problem with the heater itself. The first thing you should do with any type of back up heating options, such as kerosene heaters is to read and follow the manufacturer's instructions.
To choose a kerosene heater you should keep these things in mind:
Be sure the heater that you purchase has a UL (underwriters laboratory) listing.
Choose a heater that has an automatic safety switch that switches the heater off automatically if there is an event in which the heater gets tipped over.
Some special features that are handy: An automatic starter that will eliminate the need for matches, a fuel gauge to help ensure you do not overfill the heater as overfilling can be dangerous, a safety grill to help prevent contact burns.
Be sure that you have a smoke alarms and a carbon monoxide detector in your home.
Always take care of your wick and know how to change your kerosene heater wick.
When refueling your heater, you need to wait until your heater has cooled and refill it outside. If you refill a heater when it is hot or still burning it can start a fire. Use only crystal-clear k1 kerosene in your kerosene heater.
Subscribe to:
Posts (Atom)


















